Timber & Logs
Log Volume Calculator
Estimate the cubic volume of a log with Smalian's formula. Cubic volume is different from board-foot log scale.
Smalian's Formula — cubic log volume
Result
Enter values and press Calculate.
What this means
Smalian's formula estimates cubic log volume from the cross-sectional areas at both ends of the log. It averages the two end areas and multiplies by the log's length.
Formula
V = 0.005454 × ((D² + d²) ÷ 2) × L
- V = cubic volume (cubic feet)
- D = large-end diameter, inside bark (inches)
- d = small-end diameter, inside bark (inches)
- L = log length (feet)
Example
D = 16 in, d = 12 in, L = 20 ft → 0.005454 × ((256 + 144) ÷ 2) × 20 ≈ 21.8 cubic feet.
Assumptions & limitations
- Result is cubic feet. It is not board feet and is not converted to Doyle, Scribner or International log scale.
- Both diameters are measured inside bark. Outside-bark measurements give a larger, different result.
- This is a gross cubic-volume estimate. No deductions are made for rot, voids, sweep, crook or other defects.
- If the small-end diameter entered is larger than the large-end diameter, a warning asks you to check that the measurements weren't reversed. The result is unchanged, because the formula gives the same answer either way.
- Log volume is not standing timber volume, and it is not actual lumber yield.
Sources
- Oregon State University Extension Service, Measuring Timber Products Harvested from Your Woodland (EC 1127).