Trees & Stands
Stand Density Index (SDI) Calculator
Express stand density as the equivalent number of trees per acre at a 10-inch quadratic mean diameter.
Result
Enter values and press Calculate.
What this means
Reineke's Stand Density Index expresses a stand's density relative to a reference diameter of 10 inches: roughly, how many trees per acre the stand would have if its QMD were 10 inches.
Interpreting SDI requires an appropriate species or forest-type reference. This calculator reports raw Reineke SDI and does not determine whether a stand should be thinned. Maximum SDI and management thresholds vary by species, forest type and management system, so TimberCalcs does not label stands or calculate percent of maximum SDI.
Formula
SDI = TPA × (QMD ÷ 10)^1.605
Example
TPA = 30, QMD = 12.1106 in → 30 × (1.21106)^1.605 ≈ 40.8.
Assumptions & limitations
- Uses Reineke's conventional exponent of 1.605. Some forestry references use species-specific exponents instead, which give different values.
- QMD must be the quadratic mean diameter, not the arithmetic mean DBH.
- Raw SDI only — no stocking class, thinning recommendation or percent-of-maximum is given.
Sources
- USDA Forest Service, Umatilla National Forest, Density Management Field Exercise (White Paper F14-SO-WP-SILV-44).
- USDA Forest Service, Southern Research Station, Reineke's stand density index: a quantitative and non-unitless measure of stand density (Curtis L. VanderSchaaf, 2013; in e-Gen. Tech. Rep. SRS-GTR-175, pp. 577–579).
- Mississippi State University Extension, Stand Density Index (Publication 3636).